Referenced Scope
 | The generation of the HMI Scope Control for the HMI One Click Dashboard is only possible with an HMI version > 1.12.752.0. |
The Referenced Scope function block is used to display a Scope Chart from the Referenced Scope in the HMI Dashboard
Since the function of this function block is irrelevant for the analysis itself, it belongs to the Visualization Only category.
Configuration options
- Chart: the chart from the referenced scope to be displayed in the HMI. So far the following charts are supported: YT Chart, XY Chart, Array Bar Chart and Single Bar Chart.
- Enable Record Controls: if the checkbox is activated, a recording can be started and stopped from the HMI.
- Record Time: the recording time of a record. After reaching the time, the scope chart runs in a ring buffer.
- Display Width: the selected display width of the image. This property can also be modified in the HMI Scope Control.
Standard HMI Controls
For the algorithm Referenced Scope the following HMI Control is available for generating an Analytics Dashboard.
The HMI Scope Control for displaying a Scope Chart.
No other HMI controls can be added to the function block, as it is intended exclusively for displaying the HMI Scope Control.