Add scope

Adding a symbol in Visual Studio / TcXaeShell

1. Open the TwinCAT HMI Configuration window.

2. Go to the Scope Configurations tab.

3. Add a new configuration by right-clicking or double-clicking on <import scope configuration>.

A pop-up opens for further settings.
Add scope 2:

4. Define under:
Name the name of the configuration to be created.
Scope Configuration the scope project to be used.

Your configuration is now used by the extension to read the data from the Scope Server. The Scope Control can be used for display.

Adding a symbol via the server configuration page

1. Open the server configuration page.

2. Go to the TcHmiScope
tab. Add scope 3:

3. Go to Scope configuration.

All currently configured alarm symbols are displayed here.

4. Click Add.

A pop-up opens for further settings.
Add scope 4:

5. Define under:
    Name, the name of the corresponding setting.
    File, the scope project to be used.
    Start recording automatically, whether the recording of the scope starts immediately.

The configuration you have created is now used by the extension to read the data from the Scope Server. The Scope Control can be used for display.