Example 7

This simple example illustrates the procedure of importing and modifying a CSV file.

The task:

A given motion imported via CSV file is to be supplemented by further points on a master axis from 0 to 360 degrees and corrected as desired.
1. In the tree structure, create a master and its corresponding slave via MOTION > Tables (see Introduction).
2. Click the Import button in the properties window of the slave.
3. Select the desired CSV file in the dialog box and confirm the process.
4. Select the corresponding slave in the tree structure.
Example 7 1:
The imported graph is displayed in the Graph window and the Table window.
The function type is set to Function selection > Automatic in both sections (first and last line).
1. Use the command Example 7 2: to insert the start point at approximately (0,0) and the end point at (360,0).
2. Set the exact value of (0,0) in the first line of the table in the columns "X Start" and "Y Start“.
3. Correct the last point in the bottom line in the column "X End" (360.0) and in the column "Y End" (0.0) to the exact values.
Example 7 3:
Add more points to the graph as required.