Commands

Toolbar

The commands for the Valve Diagram Editor, which can be called in the toolbar of the respective graphic window, can only be called if the input mode of the graphic commands is activated.

Overview

Adaptation to extreme values:

The window's co-ordinates are adjusted to the extreme values of the motion.

Measure distance:

The horizontal and vertical distance to the current point from the point first clicked with the left mouse button is displayed at the top right hand corner of the window (please hold the mouse button down for this).

Current position:

The absolute horizontal and vertical position of the point currently clicked with the left mouse button is displayed at the top right hand corner of the window (please hold the mouse button down for this).

The following commands only apply in the graphic window for the position:

Horizontal shift:

• Moves the selected point horizontally.
• In the velocity window for synchronous functions: shift along a straight line in the position window.
• The left-hand edge of the graphic area can be temporarily moved in this way, so that the scale can be more easily read.

Vertical shift:

Moves the selected point vertically.

Shift:

Moves the selected point.

Insert point:

Inserts a point at the cursor position.

Delete point:

The selected point is deleted, as is the corresponding section.