UPS Info dialog

This dialog shows the detailed UPS information. Depending on the hardware model there is more or less information available.

UPS/Power Supply:

• Manufacturer: Manufacturer name.
• Model: Model name.
• Firmware Rev.: Firmware revision.
• Serial Number: Serial number.
• Last Battery Change/Service: [dd.mm.yy] or [mm/dd/yy].
• Battery Load Level: [%].
• Estimated UPS Runtime: [min]
• Internal Temperature: [°C]
• Load Current: [A]
• UPS Fan Status: Values: OK (fan is ok) or ERROR (fan is not ok).  Beckhoff P24Vxxxx with firmware version >= 45.1.I only.
• UPS Fan Speed: Beckhoff P24Vxxxx with firmware version >= 45.1.I only. The nominal fan speed is ~3000 RPM or ~10000 RPM.
• Battery Voltage: [V].
• Nominal Battery Voltage: [V].
• Input Line Voltage: [V].

Intelligent Battery (e.g.: CX2100-0914):

• Serial Number: Serial number.
• Hardware Ver.: [major.minor-build].
• Rated Capacity: [mAh].
• Manufacturing Date: [dd.mm.yyyy]
• Fuse: Values: OK (fuse is ok) or ERROR (fuse is broken/blown or not available). Available only in the second generation of UPS hardware/firmware and implemented in Beckhoff UPS Software version >= 3.0.018.
• Over Temperature: Values: OK (temperature is ok) or ERROR (over temperature detected, charging of the battery is stopped). Available only in the second generation of UPS hardware/firmware and implemented in Beckhoff UPS Software version >= 3.0.018.
• Under Temperature: Values: OK (temperature is ok) or ERROR (under temperature detected and charging of the battery is stopped). Available only in the second generation of UPS hardware/firmware and implemented in Beckhoff UPS Software version >= 3.0.018.