TwinCAT System Manager: System - Configuration


At the SYSTEM - Configuration tree-entry, project-specific TwinCAT System- and Real-Time Settings can be made.

User-defined Tasks can also be created, e.g. to output or read I/O device values from high-level language applications (Visual Basic-, Visual C++, C# .NET, Visual Basic.NET  or Delphi).


SYSTEM - Configuration Description
Boot Settings Boot / Auto-Logon settings for the local and for the target system
Real-Time Settings Configuration of TwinCAT Real-Time settings and display for Real-Time load
Priorities Display / manipulation (= Advanced User) of TwinCAT Task priorities
User-defined Tasks ("Additional Tasks") Configuration of possible additional user-defined tasks
Task settings for "Additional Tasks" (if configured) Dialog for settings of user-defined tasks
Online Display Task Load (if additional user-defined tasks are configured) Online view for the load of the user-defined task
Task Process Images (if additional user-defined tasks are configured) Mapping informations about user-defined tasks
Route Settings Informations about TwinCAT target system routing


"General" Tab

This dialog only appears, if no Remote system is selected, means the System Manager accesses the local target system (see also  "Choose Target System").
Besides that, the following dialog "Version [Local]" is equivalent.


"Version [Local]" Tab

The following dialog shows the installed TwinCAT Level of the lokale system (at this example it is "TwinCAT NC I" )  and the version und "Build"- number of it (correspondingly the version 2.9 [Build 931]).

Overview 1:


"Version (Target)" Tab

Besides the info about the locally installed TwinCAT version, another tab with corresponding info about the selected TwinCAT target system is available. The following dialog shows e.g. version 2.9  [Build 0].

Overview 2:


Choose Target:    Calls the selection dialog for TwinCAT target systems, accessible by TwinCAT Router. See also: Main Menus -> "Actions"