Settings for History View

If an online view of a variable, task execution, etc... is displayed, a right mouse-click inside the qraphical trace calls the below menu:

Settings for History View 1:

Stop

With activated Stop command (marked as checked in this case), this otherwise continuously running history view is stopped.

Settings

Opens the below described dialog for the settings related to the online history trace view.

"History Settings" dialog

After a click on Settings..., the following dialog appears:

Settings for History View 2:

Maximum

This, thru the right UpDown keys or direct input adjustable field, defiines the maximum value for the history trace view. That means the value if the trace hits the upper edge of the grid.

MInimum

Defines the minimum value, means the value if the deflection touches the lower edge of the grid.

Grid X

Defines the grid scaling of the trace view in the horizontal range (time axis). The default value here is '10'.

Grid Y

Defines the grid scaling of the trace view in the vertical range as follows: Maximum / Grid Y = number of vertical fields.
Example: A Maximum value of '100000' and a Grid Y value of '20000' results in 5 displayed fields on the Y-axis.

Velocity

The feed forward velocity of the trace can be adjusted here. Default velocity is '2'.

OK

Accepts the made changes and closes the History Settings dialog.

Cancel

Disregards eventually made changes and closes the dialog.