ScopeExit

The function block "ScopeExit" terminates one instance of TwinCAT Scope View. Internally, an instance of the ADSWRITE function block is called.

VAR_INPUT

VAR_INPUT
    bExecute        :BOOL;
    tTimeout        :TIME := DEFAULT_ADS_TIMEOUT;
END_VAR

bExecute:: The function block is activated by a positive edge at this input.

tTimeout:: Maximum time allowed for the execution of the function block.

VAR_OUTPUT
    bBusy       :BOOL;
    bError      :BOOL;
    iErrorId    :UDINT;
END_VAR

bBusy: When the function block is activated this output is set. It remains set until and acknowledgement is received.

bError: If an ADS error should occur during the transfer of the command, then this output is set once the bBusy output is reset.

iErrorId: Supplies the ADS error number when the bError output is set.

Development environment	Target system type	PLC libraries to include
TwinCAT v2.8.0 Build > 740 TwinCAT v2.9.0 Build > 925	PC or CX (x86)	TcUtilities.Lib ( Standard.Lib; TcBase.Lib; TcSystem.Lib are included automatically )
TwinCAT v2.10.0 Build >= 1301	CX (ARM)

Development environment

Target system type

PLC libraries to include

TwinCAT v2.8.0 Build > 740

TwinCAT v2.9.0 Build > 925

PC or CX (x86)

TcUtilities.Lib

( Standard.Lib; TcBase.Lib; TcSystem.Lib are included automatically )

TwinCAT v2.10.0 Build >= 1301

CX (ARM)