Error codes
Value (hex) | Value (dec) | Value (enum) | Description |
---|---|---|---|
0x0000 | 0 | NO_MP_ERROR | No error. |
0x0001 | 1 | WRONG_TERMINAL | Incorrect terminal connected. |
0x0002 | 2 | NO_ANSWER_FROM_KL6771 | No answer from the KL6771 MP-Bus master terminal. |
0x0003 | 3 | NO_LINK_TO_STRUCTURE_strDataKL6771 | Check the link to the structure DataKL6771. |
0x000A | 10 | WRONG_MP_ADDRESS_IS_0 | MP-Bus address is 0. Only addresses between 1 and 8 are allowed. |
0x000B | 11 | WRONG_MP_ADDRESS | MP-Bus address is >8. Only addresses between 1 and 8 are allowed. |
0x0015 | 21 | WRONG_SET_POINT | Wrong setpoint. |
0x0019 | 25 | MP_BUS_TIMEOUT_NO_ANSWER_FROM_SLAVE | MP-Bus timeout, no answer from slave. |
0x0020 | 26 | MP_BUS_SETPOINT_DIFF_TOO_HIGH | Difference from setpoint too high. |
0x001F | 31 | KL6771_TIME_OUT | KL6771 timeout. |
0x0020 | 32 | MP_ADDRESS_IS_IN_USE | MP-Bus address is in use. |
0x0021 | 33 | MP_DISABLED | MP-Bus disabled. |
0x0057 | 87 | MP_BUS_ERROR | MP-Bus error. |
0x0058 | 88 | MP_NO_ANSWER_ON_EVENT | MP-Bus no answer to an event. |
0x0059 | 89 | MP_NO_ANSWER | MP-Bus no answer. |
0x005A | 90 | MP_COM_BREAK | MP-Bus communication break. |
0x0062 | 98 | MP_LENGTH_PARITY_ERROR | MP-Bus length parity error. |
0x0063 | 99 | MP_CROSS_PARITY_ERROR | MP-Bus cross parity error. |
0x0065 | 101 | MP_MASTER_CONFLICT_ERROR | MP-Bus MASTER_CONFLICT_ERROR. |
0x0066 | 102 | MP_GAP_TIMEOUT_ERROR | MP-Bus GAP Timeout. |
0x0067 | 103 | MP_NO_ANSWER_SLAVE | MP-Bus no answer from slave. |
0x006E | 110 | MP_ANSWER_ERROR_FLAG | MP-Bus error bit in answer telegram is set. |
0x006F | 111 | MP_ANSWER_WRONG_LEN | MP-Bus wrong telegram length. |
0x0070 | 112 | MP_ANSWER_WRONG_TELEG | MP-Bus wrong telegram received. |
0x0073 | 115 | MP_ANSWER_WITH_ERROR | Answer contains an error. |
0x00C8 | 200 | MP_ERROR_WrongDeviceFamily | Wrong device family. |
0x012C | 300 | MP_CONF_ERROR_CO2LimitGood | Configuration error for CO2 limitation "Good". |
0x012D | 301 | MP_CONF_ERROR_CO2LimitModerate | Configuration error for CO2 limitation "Moderate". |
0x012E | 302 | MP_CONF_ERROR_CO2Limit | Configuration error for CO2 limitation. |
0x012F | 303 | MP_CONF_ERROR_WRONG_TEMP_OFFSET | Configuration error for temperature offset. |
0x0130 | 304 | MP_CONF_ERROR_WRONG_HUMIDITY_OFFSET | Configuration error for humidity offset. |
0x0131 | 305 | MP_CONF_ERROR_WRONG_CO2_OFFSET | Configuration error for CO2 offset. |
0x0132 | 306 | MP_CONF_ERROR_WRONG_TempSetpoint | Configuration error for temperature setpoint. |
0x0133 | 307 | MP_CONF_ERROR_WRONG_RelativeTempSetpoint | Configuration error for relative temperature setpoint. |
0x0134 | 308 | MP_CONF_ERROR_WRONG_DefaultTempSetpoint | Configuration error for preset temperature setpoint. |
0x0135 | 309 | MP_CONF_ERROR_WRONG_TempSetpointRange | Configuration error for temperature setpoint range. |
0x800A | 32778 | MP_ANSWER_Reserve | Reserve. |
0x800B | 32779 | MP_ANSWER_UnknowCommand | Unknown command. |
0x800C | 32780 | MP_ANSWER_WrongOrNoPassword | Wrong or no password. |
0x800D | 32781 | MP_ANSWER_CommandExecution | Command execution. |
0x800E | 32782 | MP_ANSWER_ParameterError | Parameter error. |
0x800F | 32783 | MP_ANSWER_UnknowId | Unknown ID. |
0x8010 | 32784 | MP_ANSWER_SizeMismatch | Size does not match. |
0x8011 | 32785 | MP_ANSWER_IllegalBlockNr | Invalid block number. |
0x8012 | 32786 | MP_ANSWER_InternalBusBusy | Internal bus is busy. |
0x80FF | 33023 | MP_ANSWER_ReservedForFuture | Reserve. |