KL6771 - Linking to the TwinCAT System Manager

How do I link the KL6771 to the System Manager?

KL6771 - Linking to the TwinCAT System Manager 1:

1. Select All Types and Continuous
KL6771 - Linking to the TwinCAT System Manager 2:

2. Click the mouse on the first variable in the KL6771 Parameter Status. Then press the [SHIFT] key, and hold it down. Take the mouse pointer to the last variable in the KL6771 Input Data 10, and again click the left mouse button. Now release the [SHIFT] key again.

All the terminal's data should now be highlighted (see Figure).

3. Then press the OK button.
KL6771 - Linking to the TwinCAT System Manager 3:

4. You can now check the link. To do this, go to the KL6771 and open it. All the terminal's data should now be marked by a small arrow (see Figure).
KL6771 - Linking to the TwinCAT System Manager 4:

KL6771 - Linking to the TwinCAT System Manager 4:

If that is the case, then proceed in exactly the same way with the outputs.