ModbusRtuSlave_KL6x5B

VAR_INPUT

 
VAR_INPUT
    UnitID     : UINT;
    AdrInputs : POINTER TO BYTE; (* Pointer to the Modbus input area *)
    SizeInputBytes : UINT;
    AdrOutputs : POINTER TO BYTE; (* Pointer to the Modbus output area *)
    SizeOutputBytes     : UINT;
    AdrMemory : POINTER TO BYTE; (* Pointer to the Modbus memory area *)
    SizeMemoryBytes     : UINT;
END_VAR
 

UnitID : Modbus station address (1..247). The Modbus slave will only answer if it receives telegrams containing its own station address. Optionally, collective addresses can be used for replying to any requests. Address 0 is reserved for broadcast telegrams and is therefore not a valid station address.

AdrInputs: Start address of the Modbus input array. The data array is usually declared as a PLC array, and the address can be calculated with ADR (input variable).

SizeInputBytes: Size of the Modbus input array in bytes. The size can be calculated with SIZEOF (input variable).

AdrOutputs : Start address of the Modbus output array. The data array is usually declared as a PLC array, and the address can be calculated with ADR (output variable).

SizeOutputBytes: Size of the Modbus output array in bytes. The size can be calculated with SIZEOF (output variable.

AdrMemory : Start address of the Modbus memory array. The data array is usually declared as a PLC array, and the address can be calculated with ADR (memory variable).

SizeMemoryBytes : Size of the Modbus memory array in bytes. The size can be calculated with SIZEOF (memory variable).

VAR_OUTPUT

 
VAR_OUTPUT
    ErrorId : Modbus_ERRORS;
ND_VAR
 

ErrorId: Indicates an error number in the event of disturbed or faulty communication.

Hardware connection

The data structures required for the link with the communication port are included in the function block. The allocation in the TwinCAT System Manager on a PC is carried out according to the description in Chapter Serial Bus Terminal. On a BC bus controller, the I/O addresses have to be assigned manually. See Hardware assignment at the BC bus controller.

Requirements