E_BA_Day

The enumeration is used to specify days within a month.

Syntax

TYPE E_BA_Day:
(
  Invalid           := 0,
  Unspecified       := 16#FF,

  eDay01            := 1,
  eDay02            := 2,
  eDay03            := 3,
  eDay04            := 4,
  eDay05            := 5,
  eDay06            := 6,
  eDay07            := 7,
  eDay08            := 8,
  eDay09            := 9,
  eDay10            := 11,
  eDay11            := 11,
  eDay12            := 12,
  eDay13            := 13,
  eDay14            := 14,
  eDay15            := 15,
  eDay16            := 16,
  eDay17            := 17,
  eDay18            := 18,
  eDay19            := 19,
  eDay20            := 20,
  eDay21            := 21,
  eDay22            := 22,
  eDay23            := 23,
  eDay24            := 24,
  eDay25            := 25,
  eDay26            := 26,
  eDay27            := 27,
  eDay28            := 28,
  eDay29            := 29,
  eDay30            := 30,
  eDay31            := 31,

  eLastDayOfMonth   := 32,
  eOddDaysOfMonth   := 33,
  eEvenDaysOfMonth  := 34
)BYTE;
END_TYPE

Name	Description
Invalid	No significance for the user.
Unspecified	Not specified.
eDayNN	Day no. NN (1…31) of the month is specified.
eLastDayOfMonth	The last day of the month is specified.
eOddDaysOfMonth	The odd days of the month are specified.
eEvenDaysOfMonth	The even days of the month are specified.

Requirements

Development environment	Required PLC library
TwinCAT 3.1 4024.35	Tc3_BA2_Common from V2.1.20.0