FB_GetLocalAmsNetId
This function block can be used to read the network address (AmsNetID) of a local TwinCAT PC.
VAR_INPUT
VAR_INPUT
bExecute :BOOL;
tTimeOut :TIME := DEFAULT_ADS_TIMEOUT;
END_VAR
bExecute: the block is activated by a positive edge at this input.
tTimeOut: States the length of the timeout that may not be exceeded by execution of the ADS command.
VAR_OUTPUT
VAR_OUTPUT
bBusy :BOOL;
bError :BOOL;
nErrId :UDINT;
AddrString :T_AmsNetId;
AddrBytes :T_AmsNetIdArr;
END_VAR
bBusy: When the function block is activated this output is set. It remains set until a feedback is received.
bError: In the event of an error during the command transfer, this output is set once the bBusy output has been reset.
nErrId: Supplies the ADS error number when the bError output is set.
AddrString: AmsNetID of the local PC as string (type: T_AmsNetID).
AddrBytes: AmsNetID of the local PC as byte array (type: T_AmsNetIDArr).
Requirements
Development environment |
Target platform |
PLC libraries to be integrated (category group) |
---|---|---|
TwinCAT v3.1.0 |
PC or CX (x86, x64, ARM) |
Tc2_Utilities (System) |