FB_PROFINET_SET_NAME

The function block FB_PROFINET_SET_NAME can be used to change the PROFINET name of the respective PROFINET device. PROFINET driver version 06 (V00.34) or higher, TF6270, CCAT PN Interface(B930) required

Inputs

VAR_INPUT
  bStart           : BOOL;
  NETID            : T_AmsNetId;
  PORT             : T_AmsPort;
  sProfinetName    : STRING(240);
  bNotChangeable   : BOOL;
END_VAR

Name	Type	Description
bStart	BOOL	The function block is enabled by a positive edge at this input.
NETID	T_AmsNetId	AMS NET ID of the PROFINET device
PORT	T_AmsPort	ADS port number of the PROFINET device; default = 0xFFFF
sProfinetName	STRING(240)	PROFINET device name. Max. 240 characters and the following characters permitted "a..z", "0..9", ".", "-"
bNotChangeable	BOOL	If "TRUE", the PROFINET controller cannot change the PROFINET name.

Outputs

VAR_OUTPUT
  bBusy                   : BOOL; 
  bError                  : BOOL;
  nErrorID                : UDINT; 
END_VAR

Name	Type	Description
bBusy	BOOL	When the function block is enabled, this output is set and remains set until a feedback is received. While Busy = TRUE, no new command will be accepted at the inputs.
bError	BOOL	If an error occurs during the transmission of the command, this output is set after the bBusy output is reset.
nErrorId	UDINT	Returns an ADS error number if bError output is set.

Requirements

Development environment	Target platform	PLC libraries to include
TwinCAT v3.1.4024.55	PC or CX (x64, x86, ARM)	Tc2_ProfinetDiag (>= v1.5.1.0)