Special commands
Function blocks
Name | Description |
---|---|
The control unit compares its random address with the search address. | |
Writes an 8-bit value to the DTR0 of all control units. | |
Writes an 8-bit value to the DTR1 of all control units. | |
Writes an 8-bit value to the DTR2 of all control units. | |
Starts the addressing of the control units. | |
All selected control units save the short address. | |
If the random address is the same as the search address, the control unit sends its short address. | |
The control units generate a new random address. | |
This function block sets the upper 8 bits of the 24-bit search address. | |
This function block sets the lower 8 bits of the 24-bit search address. | |
This function block sets the middle 8 bits of the 24-bit search address. | |
Addressing is terminated for all control units. | |
If the short address of the control unit is equal to the parameter nShortAddress, the output bAnswer is set to TRUE. | |
Control units whose random address is the same as the search address may no longer respond to the FB_DALIV2xCompare() command. | |
Writes an 8-bit value into the memory of a control gear. |
- FB_DALIV2xCompare
- FB_DALIV2xDTR0
- FB_DALIV2xDTR1
- FB_DALIV2xDTR2
- FB_DALIV2xInitialise
- FB_DALIV2xProgramShortAddress
- FB_DALIV2xQueryShortAddress
- FB_DALIV2xRandomise
- FB_DALIV2xSearchAddressH
- FB_DALIV2xSearchAddressL
- FB_DALIV2xSearchAddressM
- FB_DALIV2xTerminate
- FB_DALIV2xVerifyShortAddress
- FB_DALIV2xWithdraw
- FB_DALIV2xWriteMemoryLocation