PLC Configuration
The PLC configuration is dependent on the respectively configured hardware. TwinCAT supports fourdifferent hardware platforms:
- PC (i386): the PLC program runs on the PC or CX10x0.
- PC (ARM): the PLC program runs on a CX9000.
- BCxxxx: the PLC program runs on a buscontroller.
- BCxx50 or BXxxxxx
If you want to run the PLC program on a BCxxxx/BCxx50 or BXxxxx Bus Terminal PLC you can choose whether you want load the program
- via AMS (dependent on the fieldbus)
- via serial interface.