Windows

Under the "Window" menu item you will find all commands for managing the windows. There are commands both for the automatic set up of your window as well as for opening the library manager and for changing between open windows. At the end of the menu you will find a list of all open windows in the sequence they were opened. You can switch to the desired window by clicking the mouse on the relevant entry. A check will appear in front of the active window.

'Window' 'Tile Horizontal'

With this command you can arrange all the windows horizontally in the work area so that they do not overlap and will fill the entire work area.

'Window' 'Tile Vertical'

With this command you can arrange all the windows vertically in the work area so that they do not overlap and will fill the entire work area.

'Window' 'Cascade'

With this command you can arrange all the windows in the work area in a cascading fashion, one behind another.

'Window' 'Arrange Symbols'

With this command you can arrange all of the minimized windows in the work area in a row at the lower end of the work area.

'Window' 'Close all'

With this command you can close all open windows in the work area.

'Window' 'Messages' Shortcut: <Shift>+<Esc>

With this command you can open or close the message window with the messages from the last compiling, verifying, or comparing procedure. If the messages window is open, then a check (ü) will appear in front of the command.

'Window' 'Library Manager'

With this command you can open or close the library manager.

'Window' 'Log'

With this command you can open or close the Log window, where protocols of the online sessions can be displayed.