Classification of the zero offsets

Different zero offset groups can be preset and selected in the NC-program with the G-commands "G53" to "G59" and "G159" . In each of these groups, for every axis a zero offset has to be stated. The field index to be stated for the offset corresponds to the channel internal axis indication (Fig.1.1). The initial axis configuration of the NC-channel is fixed in the channel parameters [CHAN].

Classification of the zero offsets 1:
Fig. 1.1: Assignment of zero offsets and tool data to the logical axes
Classification of the zero offsets 2:

In the moment only axis configurations with one axis group are possible [CHAN]removed link: [CHAN]. Therefore "dec_achs_nr" = "achsen_idx".

Value ranges of parameters, if necessary, are also defined by stating a limit that is obtained on the basis of the data format, e.g. MAX(UNS32), etc.