Release of non-channel axes after Reset (P-CHAN-00115)

The parameter "release_non_channel_axis" determines if during a Reset all path axes, which do not belong to the default channel configuration, are released to the axes management. This does not concern the so-called SAI axes, because these always are released to the axes management!

Release of non-channel axes after Reset (P-CHAN-00115) 1:

The setting of this parameter is only useful, if P-CHAN-00075 (reset_no_axis_to_axv) is TRUE.

Variable name

Type

Permitted range

Dimension

release_non_channel_axis

BOOLEAN

0/1

----

0

During RESET all non-channel axes remain in channel(Default)

1

During RESET all non-channel axes are released to axes management