Settings for diameter programming (P-CHAN-00091)

If the zero offsets and co-ordinate preset for transverse turning axis are specified in diameter co-ordinates, then this element must be set to 1.

Variable name

Type

Permitted range

Dimension

versch_im_durchm

BOOLEAN

0/1

----

Settings for diameter programming (P-CHAN-00091) 1:

Diameter programming is also described in [PROG].

EXAMPLE: The zero offsets and co-ordinate preset for transverse turning axis are specified in diameter co-ordinates, then respectively only half the traverse distance will result.

Extract from channel parameters list:

# Zero offset and co-ordinate preset of transverse
turning axis in diameter co-ordinatesversch_im_durchm              1