Block global edge banding (P-CHAN-00029)

For contours that are described by many short motion blocks (e.g. generated by CAD/CAM tool), it is difficult to match the measuring signal of edge banding on a defined motion block. If you enable this parameter, it is possible to do edge banding over several blocks after start of the measuring traverse [PROG].

Variable name

Type

Permitted range

Dimension

kasto_multi_block

BOOLEAN

0/1

----

EXAMPLE:The block global edge banding is enabled.

Extract from channel parameters list: 

# Flag for block global edge banding
kasto_multi_block             1