Information on external tool management (P-CHAN-00087)

If the flag is activated, after programming a T-command a message is sent to the external tool management to prepare the magazine for the tool change. This flag is only evaluated if an external tool management is present (P-CHAN-00016). Therefore, it only makes sense to activate this flag, if the flag for an external tool management is also activated.

Variable name

Type

Permitted range

Dimension

t_info_to_wzv

BOOLEAN

0/1

----

EXAMPLE: If the T-command is programmed the external tool management shall be informed to prepare the tool change.

Extract from channel parameters list: 

# Flag for external tool management
ext_wzv_vorhanden             1
# Info to external tool
managementt_info_to_wzv       1