Name of hardware (P-AXIS-00037)

Name of hardware (P-AXIS-00037) 1:

These entries are not taken over when the axis parameters list is actualized, to change them a reboot is necessary.

CAUTION

For TwinCAT-Systems this parameter is not available.

Variable name

Type

Permissible range

Axis type

Dimension

cam_hw_id_string

ISG_CHAR

HARDWARE_ID_NBR_OF_CHAR

T, R

----

The declared string for the hardware name must refer to the entry of the hardware name of a specific I/O-card of the hardware configuration list (Entry: device[i].name in hwconf.lis [HWCF]). Otherwise during initialization the position controler reports an error because it can not detect its hardware.