2-point Valve Actuator

This module controls a 2-point Valve Actuator.

Settings

2-point Valve Actuator 1:

Parameters

Negate Digital Output: Inverts the output controlling the valve.

Online

2-point Valve Actuator 2:

Commands

Open: Opens the valve. The output will be active, if not negated in the settings-menu.
Close: Closes the valve. The output will be inactive, if not negated in the settings-menu.

State

Driving Direction: Shows the actual state of the valve.

State PLC Module

Execution State: Shows if the module is running or stopped.
Error: In case of an error, the error code and the error parameter are displayed in this box.
Start/Stop: Starts/stops the module.