DC-OK relay contact
This feature monitors the output voltage, which is produced by the power supply itself. It is independent of a back-fed voltage from a unit connected in parallel to the power supply output.
Contact closes | As soon as the output voltage reaches 90% of the adjusted output voltage. |
Contact opens | As soon as the output voltage dips more than 10% below the adjusted output voltage. |
Contact re-closes | As soon as the output voltage exceeds 90% of the adjusted voltage. |
Contact ratings
| maximal 60Vdc 0.3A, 30Vdc 1A, 30Vac 0.5A, resistive load |
minimal permissible load 1mA at 5Vdc | |
Isolation voltage | see the dielectric strength table in the chapter “Dielectric strength” |
