EMC

The power supply is suitable without any restrictions for application in industrial environments as well as in residential, commercial and light industrial areas and small businesses. A detailed EMC report is available on request.

The device was tested according to EN 61000-6-1, EN 61000-6-2, EN 61000-6-3 and EN 61000-6-4.

EMC interference immunity
Strong transients	VDE 0160	Over the entire load range	750 V, 1.3 ms

EMC interference emission	According to the generic standards: EN 6100-6-3 and EN 6100-6-4
Conducted interference emission, input lines	EN 55011, EN 55022, FCC Part 15, CISPR 11, CISPR 22	Class B
Conducted interference emission, output lines ²⁾	IEC/CISPR 16-1-2, IEC/CISPR 16-2-1,	Limit values for the DC current connection according to EN 61000-6-3 are not met ³⁾
Interfering radiation	EN 55011, EN 55022	Class B
Harmonic input current	EN 61000-3-2	Requirements for Class A devices met
Voltage fluctuations, flicker	EN 61000-3-3	Requirements met ¹⁾
This device complies with FCC Part 15. Operation is subject to the following two conditions: This device must not cause adverse interference, and This device must tolerate any interference it is subjected to, including interference that may cause undesired operation.

¹⁾ Tested with constant current loads, non-pulsating

²⁾ For information only, not mandatory for EN 61000-6-3

³⁾ Quasi peak values met, mean values +5 dB