Parameterization

In the TwinCAT System Manager, a PS2001-xxxx-1001 power supply is parameterized via two dialog boxes/tabs.

• The Process Data tab (A) for the communication-specific settings only displays the process data.
• The CoE-Online tab (B) for settings in the slave contains all data exchanged via the EtherCAT interface.



• Changes to the process data-specific settings are generally only effective after a restart of the EtherCAT master:
  restart TwinCAT in RUN or CONFIG mode; RELOAD in CONFIG mode
• Changes in CoE - Online
• are in general immediately effective.
• are in general stored non-volatile only in the terminal/in the slave and should therefore be entered in the CoE StartUp list. This list is processed at each EtherCAT start and the settings are loaded into the slave.
• Observe the Notes for parameterization via the CoE directory.