Diag Messages
Further Information
- 4101, Terminal-Overtemperature
- 4411, Phase shift of the supply voltage greater than 195°
- 4413, Internal load Ch.II
- 4414, I2T Motor overload Ch.II
- 4417, Motor-Overtemperature Ch.II
- 4446, Missing brake current Ch.II
- 4447, Overcurrent motor brake Ch.II
- 4600, Wrong supply voltage range
- 4803, Fuse protection
- 8002, Communication aborted
- 8003, Configuration error: 0xXX, 0xXX, 0xXX
- 8104, Terminal-Overtemperature
- 8105, PD-Watchdog / Watchdog timeout to field-side
- 8144, Hardware fault (II)
- 8408, Internal load Ch.II
- 8409, I2T-Model motor overload Ch.II
- 8416, Motor-Overtemperature Ch.II
- 8445, Motor brake short circuit Ch.II
- 8446, Missing brake current Ch.II
- 8447, Overcurrent motor brake Ch.II
- 8550, Zero crossing phase XX missing
- 8551, Phase sequence Error
- 8581, Wire broken LII Ch.II
- 8600, Supply voltage missing
- 8618, One of the grid phases (L1,L2,L3) is lost and not there
- 870A, Range error of RTD measurement Ch.II
- 8803, Fuse protection has intervened
- 8A00, Fuse is blown