How to write a script into a terminal?

If you use standard configurations for your terminals, then script writing is a feature that can save you time and money. Because with a few clicks, you can do the configuration for all your terminals.

step 1: click Online

step 2: hover onto Terminal and click Script-Init...

How to write a script into a terminal? 1:

step 3: choose a script file and click open (öffnen). (example file: TemplateScriptTerm.xml)

How to write a script into a terminal? 2:

step 4: the following menu will appear. If you have chosen the wrong file (1) click Select... (2)

step 5: choose the start (3) and the end (4) terminal where the script should be written in.

step 6: click start

How to write a script into a terminal? 3:

step 6: Click Exit to leave the menu.

How to write a script into a terminal? 4:

 

How to write a script into a terminal? 5:

Reboot may be necessary

In some cases, a reboot of the Bus Coupler is required to accept these parameters. If, for example, the byte size is modified in the process image for KL60xx serial Bus Terminals, the Bus Coupler only adopts this information with the next reboot.

 

For definition of the schema of script-file for terminals see sample file under
"...\KS2000\Resource\Scripts\Coupler\TemplateScriptTerm.xml"

 

How to write a script into a terminal? 6: