Settings

Settings for parameterizing the KM2774-0000.

Current limit

Channel 1 (R34)

R34

Here you can set the current limit for channel 1 (default: 1500 mA).
Permissible value range: 50 to 1500 mA.

Channel 2 (R35)

R35

Here you can set the current limit for channel 1 (default: 1500 mA).
Permissible value range: 50 to 1500 mA.

Channel 3 (R36)

R36

Here you can set the current limit for channel 1 (default: 1500 mA).
Permissible value range: 50 to 1500 mA.

Channel 4 (R37)

R37

Here you can set the current limit for channel 1 (default: 1500 mA).
Permissible value range: 50 to 1500 mA.

Dead time

Dead time for channel 1 (R38)

R38

Here you can define the dead time until overcurrent shutdown for channel 1 (default: 400 ms).
Permissible value range: 100 to 2560 ms in steps of 10 ms.
If you enter 0 ms, the dead time is disabled. The output switches off immediately when the current limit is exceeded.

Dead time for channel 2 (R39)

R39

Here you can define the dead time until overcurrent shutdown for channel 2 (default: 400 ms).
Permissible value range: 100 to 2560 ms in steps of 10 ms.
If you enter 0 ms, the dead time is disabled. The output switches off immediately when the current limit is exceeded.

Dead time for channel 3 (R40)

R40

Here you can define the dead time until overcurrent shutdown for channel 3 (default: 400 ms).
Permissible value range: 100 to 2560 ms in steps of 10 ms.
If you enter 0 ms, the dead time is disabled. The output switches off immediately when the current limit is exceeded.

Dead time for channel 4 (R41)

R41

Here you can define the dead time until overcurrent shutdown for channel 4 (default: 400 ms).
Permissible value range: 100 to 2560 ms in steps of 10 ms.
If you enter 0 ms, the dead time is disabled. The output switches off immediately when the current limit is exceeded.