Basic Function Principles

Operation of the MP-bus Bus Terminal requires function blocks that are available for download.

The following drives and sensors are supported:

• VAVs (e.g. NMV-D2M)
• FLS window opener
• Flap and positioning actuators (e.g. NM24-MFT2, NV23-MFT2)
• Fire dampers (e.g. BF24TL-T-ST)
• PTH sensors

There is a function block that carries out communication with the device for each of these drives or sensors.

The MP-Bus slave is addressed through an addressing block. The slaves can be addressed manually or automatically.

Software required for use of the KL6771

TwinCAT PLC has a corresponding library for addressing the KL6771 from within the application.

Required TwinCAT library TwinCAT supports the KL6771 with its own library. If the KL6771 is to be used with an external controller, a Bus Terminal controller (BC or BX) is required on which the MP-Bus library can run. Operation of the KL6771 on a PC or CX without TwinCAT PLC is not supported!