Configuration of the KL6201/KL6211

Connect the configuration interface of your fieldbus coupler with the serial interface of your PC via the configuration cable and start the KS2000 Configuration Software.

Configuration of the KL6201/KL6211 1:

Click on the Login button. The configuration software will now load the information for the connected fieldbus station.
In the example shown, this is

a BK9000 Ethernet Coupler
a KL9528 AS-i power supply terminal (double overall width)
a KL6201 AS-i Master Terminal
a KL9010 bus end terminal

The left-hand KS2000 window displays the terminals of the fieldbus station in a tree structure.
The right-hand KS2000 window contains a graphic display of the fieldbus station terminals.

In the tree structure of the left-hand window, click on the plus-sign next to the terminal whose parameters you wish to change (item 1 in the example).

For the KL6201/KL6211, the branches Register, Settings and ProcData are displayed:

Register enables direct access to the KL6201/KL6211 registers.
Dialog masks for the parameterization of the KL6201/KL6211 can be found under Settings.
ProcData shows the process data of the KL6201/KL6211.