Parameterization with KS2000

Connect the configuration interface of your Fieldbus Coupler with the serial interface of your PC via the configuration cable and start the KS2000 Configuration Software.

Click on the Login button. The configuration software will now load the information for the connected fieldbus station.
In the example shown, this is

a BK2020 Lightbus Coupler
a KL1xx2 Digital Input Terminal
a KL6021-0023 serial interface terminal (RS485 for EnOcean receiver KL6023)
a KL9010 Bus End Terminal

Display of the fieldbus station in KS2000

The left-hand KS2000 window displays the terminals of the fieldbus station in a tree structure.
The right-hand KS2000 window contains a graphic display of the fieldbus station terminals.

In the tree structure of the left-hand window, click on the plus-sign next to the terminal whose parameters you wish to change (item 2 in the example).

KS2000 branch for channel 1 of the KL6021-0023

For the KL6021-0023, the branches Register, Settings and ProcData are displayed:

Register permits direct access to the registers of the KL6021-0023.
There are no dialog masks to be found for parameterizing the KL6021-0023 under Settings, since no terminal-specific settings are required.
ProcData displays the KL6021-0023 process data.