Introduction and contact assignment
HD Bus Terminal, 16-channel digital output 24 VDC, 0.5 A, with diagnostics
The KL2819 Bus Terminal has 16 digital output channels for the switching of 24 V loads up to 0.5 A. The integrated diagnostics can be evaluated by the controller and indicated by the LEDs. Overtemperature and the lack of a voltage supply to the terminal are supplied as diagnostic information. Moreover, each of the channels can signal e.g. a short circuit. The switching state and any error of the output are indicated by the LED. Maintenance of the application is simplified by the diagnostic function. The power contacts are connected through; reference ground of the outputs is the 0 V power contact. The outputs are electrically isolated from the fieldbus side.
LED displays
LED | Color | Meaning | |
|---|---|---|---|
OUTPUT 1- 16 | green | off | No output signal |
on | Output signal 24 V | ||
DIAGNOSE 1- 16 | red | on | ERROR: Overcurrent / Overtemperature |
Contact assignment
Terminal point | Description | |
|---|---|---|
Name | No. | |
Output 1 | 1 | Output 1 |
Output 2 | 2 | Output 2 |
Output 3 | 3 | Output 3 |
Output 4 | 4 | Output 4 |
Output 5 | 5 | Output 5 |
Output 6 | 6 | Output 6 |
Output 7 | 7 | Output 7 |
Output 8 | 8 | Output 8 |
Output 9 | 9 | Output 9 |
Output 10 | 10 | Output 10 |
Output 11 | 11 | Output 11 |
Output 12 | 12 | Output 12 |
Output 13 | 13 | Output 13 |
Output 14 | 14 | Output 14 |
Output 15 | 15 | Output 15 |
Output 16 | 16 | Output 16 |