KL2552 - LED displays
Left LED prism
|
LED |
Display | |
|---|---|---|
|
Run (green) |
on |
Data transmission on the K-bus is active |
|
Enc. A: A (green) |
on |
There is a signal at input A for encoder A. |
|
Enc. B: A (green) |
on |
There is a signal at input A for encoder B. |
|
Input 1 (green) |
on |
There is a signal at input 1. |
|
Enc. Rdy. (green) |
on |
Encoder evaluation ready to operate. |
|
Enc. A: B (green) |
on |
There is a signal at input B for encoder A. |
|
Enc. B: B (green) |
on |
There is a signal at input B for encoder B. |
|
Input 2 (green) |
on |
There is a signal at input 2. |
Right LED prism
|
LED |
Display | |
|---|---|---|
|
Drv. Rdy. (green) |
on |
Motor driver ready to operate. |
|
Enable A (green) |
off |
Channel 1 is either not enabled or not ready to operate. |
|
on |
Channel 1 is enabled and is ready to operate. | |
|
Warning A (yellow) |
on |
Warning of channel 1 |
|
Error A (red) |
on |
There is an error at channel 1 |
|
Power (green) |
off |
The motor supply voltage is not available. |
|
on |
The motor supply voltage is available. | |
|
Enable B (green) |
off |
Channel 2 is either not enabled or not ready to operate. |
|
on |
Channel 2 is enabled and is ready to operate. | |
|
Warning B (yellow) |
on |
Warning of channel 2 |
|
Error B (red) |
on |
There is an error at channel 2 |