FC200x – PCI cards for Lightbus

Installation of the PCI driver

After installation of the Beckhoff Lightbus card, Windows 2000, for example, comes up with the following message during start-up:

 
 fc200x_detected_by_win2k
Installation of the PCI driver – new hardware found

The PCI driver for the Lightbus card is supplied with the Beckhoff TwinCAT automation software.

Follow the instructions of the Add Hardware Wizard.
Under Windows XP, the PCI driver is installed in the same way.
Under Windows NT 4.0, the PCI driver is not required.

Example for the resources of an FC200x under Windows2000.
(Control Panel / System / Hardware / Device Manager / TwinCAT PNP drivers / TwinCAT FC2002x PCI driver / Resources):

 
 fc200x_resources
Installation of the PCI driver – resource settings