FC1100 | PCI EtherCAT slave card

The PCI ID values of the FC1100 are listed in the following table. The ET1100 (see type and revision register for detailed information) chip is used to access the EtherCAT network. The address range of the ET1100 is mapped to the memory specified by Base Address Register 2 (BAR2) of the PCI device.

FC1100 | PCI EtherCAT slave card 1:

Configuration bits

The low nibble of BAR2 contains configuration bits.

FC1100 PCI values

Parameter

Value

DeviceID

0x1100

VendorID

0x15ec

The following figure shows the hardware structure of the FC1100 slave card.

FC1100 | PCI EtherCAT slave card 2:
Hardware scheme