1. Fbb-x903 Profinet
2. Configuration
3. Configuration with S7
4. Example with Step 7

Example with Step 7

Install the GSDML file (Step 7 from version 5.4 + SP1)

To this end open the hardware manager. Install the GSDML file.

Add an IL230x-B903 node in your Manager and add the expansion modules according to your configuration.

Set the name of the PN device, e.g. "il230x-b903-10" ["il" must be in lower case] (set the address switches of the box to 0xFF, then switch on then the coupler).

The configuration will now look as follows, for example. Load the configuration into your control system.