Address
Before starting up the Fieldbus Box, the Node-ID has to be set. The Node ID can be set using the two rotary selection switches behind the transparent cover. The default setting is 11. Any address is permitted, but each address may only be used once within the network. The address is changed while the Fieldbus Box is switched off. To do this, unscrew the cover and use a screwdriver to move the switches to the desired position. Make sure that the switches engage properly. The switch on the left represents the tens, while that on the right represents the units. The change in address is active as soon as the device is switched on.
Example
You want to set address 34.
Left-hand rotary selection switch 3
Right hand rotary selection switch 4
