Peak hold
This functional unit is a drag indicator function. It continuously monitors the measured value and saves extremes, which can be used to diagnose sensor overloads.
Index | Name |
|---|---|
0x90n0:0C | Actual Positive Peak Hold |
0x90n0:0D | Actual Negative Peak Hold |
The reset is carried out by
- an interface change
- or setting to de-energized [(re-)power cycle]
- or 0->1 in the PDO “AI Control.Peak Hold Reset”
- or the command x301n to index 0xFB00:01 (channel 1: n = 0, channel 2: n = 1, ...).
During execution, “Status” 255 “busy” is displayed in index 0xFB00:02, “0” means “successfully completed”, - and the command x3001 “Reset all counters”
During command execution, “Status” 255 “busy” is displayed in index 0xFB00:02, “0” means “successfully completed”.
The firmware responds to an unknown command with
