Technical Data

All values are typical values over the entire temperature range, unless stated otherwise.

Fieldbus
Protocol	EtherCAT / Industrial Fast Ethernet
Copper connection	2 x M8 socket, 4-pin, A-coded, shielded
Fiber optic connection	1 x LC duplex For IP67 use: only use HARTING "PushPull LC Duplex"
Data transfer medium: copper	Ethernet / EtherCAT cable (min. Cat.5), shielded
Data transfer medium: fiber optic	Multi-mode glass fiber 50/125 µm
Copper cable length	max. 100 m, twisted pair or star quad CAT5(e)
Fiber optic cable length	max. 2000 m (100BASE-FX)
EtherCAT function	Fast Ethernet / 100 Mbaud media converter Cut-through switching Port handling/link control
Ethernet function	Fast Ethernet / 100 Mbaud media converter (all protocols based on IEEE 802.3) IEEE 802.3u auto-negotiation, half or full duplex, automatic settings Link Loss Forwarding (notification direction configurable) Store and Forward Mode (FIFO) Unmanaged
Propagation delay	approx. 1 µs
Electrical isolation	500 V

Optical data of the fiber-optic connection
Transceiver wavelength	typically 1310 nm
Minimum output power	-23.5 dBm avg. (50/125 µm, NA = 0.2)
Maximum output power	-14 dBm
Maximum sensitivity (Minimum required input power)	-31 dBm
Maximum permissible input power	-14 dBm

Supply voltages
Connection	Input: M8 connector, 4-pin, A-coded Downstream connection: M8 socket, 4-pin, A-coded
U_S nominal voltage	24 V_DC (-15 % / +20 %)
U_S sum current: I_S,sum	max. 4 A
Current consumption from U_S	120 mA
Rated voltage U_P	24 V_DC (-15 % / +20 %)
U_P sum current: I_P,sum	max. 4 A
Current consumption from U_P	None. U_P is only forwarded.

Housing data
Dimensions W × H × D	85 mm x 126 mm x 26.5 mm (without connector)
Weight	300 g
Installation position	variable
Material	PA6 (polyamide)

Environmental conditions
Ambient temperature during operation	-25 … +60 °C -25 … +55 °C according to cURus
Ambient temperature during storage	-40 … +85 °C
Vibration resistance, shock resistance	conforms to EN 60068-2-6 / EN 60068-2-27 Additional tests
EMC immunity / emission	conforms to EN 61000-6-2 / EN 61000-6-4
Protection class	IP65, IP66, IP67 (conforms to EN 60529)

Approvals/markings
Approvals/markings ^*)	CE, cURus

*) Real applicable approvals/markings see type plate on the side (product marking).

Additional tests

The devices have undergone the following additional tests:

Test	Explanation
Vibration	10 frequency sweeps in 3 axes
	5 Hz < f < 60 Hz displacement 0.35 mm, constant amplitude
	60.1 Hz < f < 500 Hz acceleration 5 g, constant amplitude
Shocks	1000 shocks in each direction, in 3 axes
Shocks	35 g, 11 ms