Status LEDs

There is a status LED next to each supply voltage output. It shows the status of the two output voltages at this output.

LED signal	Meaning
Off	The output voltages U_S and U_P are switched off.
Lights up green	At least one of the output voltages (U_S, U_P) is switched on. The output currents are within the nominal operating range. (I < I_n)
Flashing green	Warning message. Overcurrent on at least one of the output voltages.
Flashes red	Error message. This signal is output in two cases: At least one of the output voltages has been switched off within the last 20 seconds due to a protective function. The box has been switched on within the last 20 seconds. Prior to switching on there was an error message that had not yet been reset.
Lights up red	Error message. At least one of the output voltages has been switched off due to a protective function.
Chaser light red (all four status LEDs)	Error message. Undervoltage or overtemperature.