Introduction
Notice | ||
 | Separate operating instructions for safety functions The safety functions of product variant -9071 are implemented by the integrated EP2921 TwinSAFE option. All information on the safety functions can be found in the operating instructions for the EP2921. | |
The EP7412-x071 EtherCAT Box offers two outputs with integrated MDR controller for the direct connection of 24/48 VDC conveyor roller motors or other BLDC motors with max. 4 A. Two additional digital inputs/outputs per channel enable connection of e.g. photoelectric switches or actuators.
The EP7412-x071 takes over the complete control of a roller motor independently of the manufacturer of conveyor or motor. Maximum rated current, acceleration or deceleration ramps and various other parameters can be configured and allow for a wide range of adaptations to different applications. The control of the motors is sensorless.
The EtherCAT Box measures only 309 mm × 94 mm × 25 mm can be easily mounted in the side profiles on the conveyor frame. It requires no additional protective covering. Power supply is realized via an L coded M12 connector.