Linking an NC axis with EP7047
![]() | This step can usually be skipped If you have carried out the commissioning in accordance with this documentation, an NC axis has already been linked to EP7047-1032. See chapter Integrating EP7047 into a TwinCAT project. |
- 1. In the Solution Explorer: Double-click "Axis n".
- 2. Click on the "Settings" tab.
- 3. Click "Link to I/O".
- A dialog box opens.
- 4. Select EP7047 and click "OK".
Note: If EP7047 is not available for selection here, please check:
- Is EP7047 included in the "I/O" section?
- Is a predefined "Positioning interface ..." process image selected?
- The process data from EP7047 are linked to the axis.