Setting the default text

If the EtherCAT status changes from "OP" to another status, the text is overwritten with the default text.

Saving the default text in the memory

Note

The lifetime of the memory is reduced with each saving operation

After a certain number of saving operations, the memory is defective.

  • Do not change the default text more often than is necessary.
1. Write and configure the text as described in the chapter Displaying text.
2. Write the value 2 in the CoE parameter FB00:01hex "Request".
3. Check the value of the CoE parameter FB00:02hex "Status".
Value 255: the saving operation is running.
Value 1: the saving operation was successfully completed.
Result: the values of all parameters in the CoE object 8008 "DIS CHR Settings" were saved in non-volatile memory.