Display of the measured values

In the factory setting the measured values are displayed as raw values.

You can change the display in parameter 8080:1D_hex "Presentation".

Select one of the following display types:

• "Raw Values": display as raw values
• "milli G": display as physical values with the unit mg.

The option "Horizontal Off-Axis Angle" does not apply for the display of the measured acceleration values. "Horizontal Off-Axis Angle" activates the inclination measurement.

Evaluate the measured values according to the selected display type. See chapter: Interpretation of the measured values

The raw values have a higher resolution than the physical values.