EL9505, EL9508, EL9510, EL9512, EL9515 - Technical data
Technical data | EL9505 | EL9508 | EL9510 | EL9512 | EL9515 |
---|---|---|---|---|---|
Input voltage | 24 VDC | ||||
Output voltage | 5 VDC±1% | 8 VDC±1% | 10 VDC±1% | 12 VDC±1% | 15 VDC±1% |
Output current | 0.5 A | ||||
Short circuit diagnosis, overload: | Overcurrent LED | ||||
Short circuit proof | yes | ||||
Parallel operation permitted | no | ||||
Message to E-bus | yes | ||||
Power contacts (right) | U0, 0 V, shield | ||||
E-Bus current consumption | 90 mA typ. | ||||
Bit width in process image | 2 | ||||
Electrical connection to mounting rail | - | ||||
Residual ripple | <5 mV | ||||
Electrical isolation | yes (500 V against field level) | ||||
Dimensions (W x H x D) | approx. 15 mm x 100 mm x 70 mm (width aligned: 12 mm) | ||||
Configuration | no address or configuration settings required | ||||
Weight | approx. 65 g | ||||
Permissible ambient temperature range during operation | 0°C ... + 55°C | ||||
Permissible ambient temperature range during storage | -25°C ... + 85°C | ||||
Permissible relative humidity | 95 %, no condensation | ||||
on 35 mm mounting rail conforms to EN 60715 | |||||
Enhanced mechanical load capacity | yes, see also installation instructions for enhanced mechanical load capacity | ||||
Vibration/shock resistance | conforms to EN 60068-2-6 / EN 60068-2-27, EN 60068-2-29 | ||||
EMC immunity/emission | conforms to EN 61000-6-2 / EN 61000-6-4 | ||||
Protection class | IP20 | ||||
Installation position | variable | ||||
Marking / Approval*) |
*) Real applicable approvals/markings see type plate on the side (product marking).
Ex markings
Standard | Marking |
---|---|
ATEX | II 3 G Ex nA IIC T4 Gc |
IECEx | Ex nA IIC T4 Gc |