Firmware compatibility

Beckhoff EtherCAT devices are delivered with the latest available firmware version. Compatibility of firmware and hardware is mandatory; not every combination ensures compatibility. The overview below shows the hardware versions on which a firmware can be operated.

Note

It is recommended to use the newest possible firmware for the respective hardware.
Beckhoff is not under any obligation to provide customers with free firmware updates for delivered products.

Note

Risk of damage to the device

Pay attention to the instructions for firmware updates on the separate page.

If a device is placed in BOOTSTRAP mode for a firmware update, it does not check when downloading whether the new firmware is suitable.
This can result in damage to the device!
Therefore, always make sure that the firmware is suitable for the hardware version!

EL6695

Hardware (HW)	Firmware (FW)	Revision no.	Date of release
02 – 11*	03	Primary: EL6695‑0000‑0001 Secondary: EL6695‑0002‑0001	2015/02
	04	Primary: EL6695‑0000‑0002 Secondary: EL6695‑0002‑0002	2015/06
	04	Primary: EL6695‑0000‑0003 Secondary: EL6695‑0002‑0003	2015/06
	05	Primary: EL6695‑0000‑0004 Secondary: EL6695‑0002‑0004	2015/07
	06		2015/08
	07	Primary: EL6695‑0000‑0005 Secondary: EL6695‑0002‑0005	2017/10
	08		2018/04
	09	Primary: EL6695-0000-0006, Secondary: EL6695-0002-0006	2021/07
	10*		2022/02

*) This is the current compatible firmware/hardware version at the time of the preparing this documentation. Check on the Beckhoff web page whether more up-to-date documentation is available.