Technical data
Technical data | EL6695 |
|---|---|
Ports | Primary side: E-bus (terminal strand), secondary side: 2 x 100 Mbit/s Ethernet RJ 45, in/out |
Function | EtherCAT distributed clock synchronization, data exchange synchronous/asynchronous |
Cable length | Secondary port: max. 100 m 100BASE-TX |
Hardware diagnostics | Status LEDs |
Power supply Current consumption | Primary: via the E-bus 400 mA typically Only one of the voltages is required for operation. If both voltages are present, the internal power supply unit preferentially uses the 24 V supply |
Distributed Clocks | Yes, TwinCAT from TC3.1 b4018.4 is required |
Electrical isolation | 500 V (E-bus/secondary side) |
Cyclic process data | max. 3 kbyte in each direction Notice: how many cyclical PDOs are supported mainly depends on the EcMaster used With TC2.11b2248 or TC3.1 b4018: 255 variables, maximum overall size MTU (~1400 bytes) |
Supported asynchronous protocols | CoE, EoE, AoE, FoE, (VoE, SoE) |
PDO transfer rate | Depends on the operating mode and the data quantity (typically 10 to 100 µs) |
Minimum EtherCAT cycle time | 50 µs |
Special features | ● Can be used as external reference clock in TwinCAT ● Synchronous data exchange ● Flexible CoE definition / CoE device emulation ● Can be used for direct two-sided DC synchronization ● PDO mapping (symmetric or selective) ● ADS routing (processing of ADS queries from two masters) ● Transfer rate up to 5 kbytes of user data per FoE |
Operating/storage temperature | 0 to +55 °C / -25 to +85 °C |
Relative humidity | 95 % no condensation |
Vibration/shock resistance | Conforms to EN 60068-2-6/EN 60068-2-27 |
EMC immunity/emission | Conforms to EN 61000-6-2/EN 61000-6-4 |
Protect. class / installation pos. | IP 20/variable |
Dimensions | Width: 24 mm (side-by-side installation) |
Marking / Approvals*) | CE, EAC, UKCA |
*) Real applicable approvals/markings see type plate on the side (product marking).