Configuration of the IO-Link devices
The configuration of the IO link devices is carried out in the IO link configuration tool. Configure the IO link device as described below.
- Requirement: an IO-Link master has been added in the Solution Explorer under the "I/O" entry.
- 1. Open the IO link configuration tool.
- 2. Import the IODD file of the IO link device.
- 3. Assign devices to ports.
- Assign a device to a port.
- Configure a port as digital in- or output.
- 4. Remove a device from a port.
- 5. Activate the IO link configuration, so that changes become effective.